Subject: PMP> Re: PWG-ANNOUNCE> Re:New Printer MIB Enums for the Finisher MIB

From: Tom Hastings <[email-masked]>
Date: Tue, 30 Jun 1998 13:06:25 PDT

Lets follow our new PWG Process (just posted in /pub/pwg/general).

We've now past the Last Call and need the Formal Approval step.

Currently Formal Approval is a vote by organization.  It can be conducted
either at a meeting or on the PMP mailing list (after announcement
on the PWG-ANNOUNCE mailing list).

Since the meeting is coming up we could do the vote during the Printer MIB
status section of the PWG meeting.  On the other hand, since the 
Printer MIB WG is fairly dormant, we might want to take the vote on the
mailing list.  Ron's and/or Lloyd's call, I think.

Tom

At 08:19 6/29/98 PDT, Ron Bergman wrote:
>The last call for comments on the additional Printer MIB enums has expired.
>The following changes for the Finisher MIB will be added.
>
>
>1.  Alert Group enumerations:
>
>PrtAlertGroupTC ::= TEXTUAL-CONVENTION
>-- This value is a type 1 enumeration for values in the range
>-- 1 to 29.
>-- Values of 30 and greater are type 2 enumerations and are
>-- for use in other MIBs that augment tables in the Printer
>-- MIB. Therefore, other MIBs may assign alert codes of 30 or
>-- higher to use the alert table from the Printer MIB without
>-- requiring revising and re-publishing this document.
>    STATUS     current
>    DESCRIPTION
>      "The type of sub-unit within the printer model that this
>       alert is related.  Input, output, and markers are
>       examples of printer model groups, i.e., examples of
>       types of sub-units. Wherever possible, these
>       enumerations match the sub-identifier that identifies
>       the relevant table in the printer MIB.
>
>       NOTE: Alert type codes have been added for the host
>       resources MIB storage table and device table. These
>       additional types are for situations in which the
>       printer's storage and device objects
>       must generate alerts (and possibly traps for critical
>       alerts)."
>    SYNTAX     INTEGER {
>         other(1),
>         hostResourcesMIBStorageTable(3),
>         hostResourcesMIBDeviceTable(4),
>         generalPrinter(5),
>         cover(6),
>         localization(7),
>         input(8),
>         output(9),
>         marker(10),
>         markerSupplies(11),
>         markerColorant(12),
>         mediaPath(13),
>         channel(14),
>         interpreter(15),
>         consoleDisplayBuffer(16),
>         consoleLights(17),
>         alert(18),
>    -- Values for Finisher MIB
>         finDevice(30),
>         finSupply(31),
>         finSupplyMediaInput(32),
>         finAttributeTable(33)
>    -- End of values for Finisher MIB
>         }
>
>
>2. Marker Supplies Type enumerations:
>
>PrtMarkerSuppliesTypeTC ::= TEXTUAL-CONVENTION
>-- This is a type 3 enumeration 
>    STATUS       current
>    DESCRIPTION
>      "The type of this supply."
>    SYNTAX       INTEGER {
>         other(1),
>         unknown(2),
>         toner(3),
>         wasteToner(4),
>         ink(5),
>         inkCartridge(6),
>         inkRibbon(7),
>         wasteInk(8),
>         opc(9),    --photo conductor
>         developer(10),
>         fuserOil(11),
>         solidWax(12),
>         ribbonWax(13),
>         wasteWax(14),
>         fuser(15),
>         coronaWire(16),
>         fuserOilWick(17),
>         cleanerUnit(18),
>         fuserCleaningPad(19),
>         transferUnit(20),
>         tonerCartridge(21),
>         fuserOiler(22),
>    -- Values for Finisher MIB
>         water(23),
>         wasteWater(24),
>         glueWaterAdditive(25),
>         wastePaper(26),
>         bindingSupply(27),
>         bandingSupply(28),
>         stitchingWire(29),
>         shrinkWrap(30),
>         paperWrap(31),
>         staples(32),
>         inserts(33),
>         covers(34)
>    -- End of values for Finisher MIB
>     }
>
>
>	Ron Bergman
>	Dataproducts Corp.
>
>
>
>